BLOG

How to Demolish and Rebuild a Custom Home in Sydney: Step-by-Step Guide

Custom Home in Sydney

Table of Contents

Thinking About Building? 
Book a FREE Consultation

Every block and lifestyle is different. We’re happy to walk you through what would work best for your land.

There are six main steps in a Knock Down Rebuild Sydney project. You check the block and the budget, design the new house, get it approved through a DA or CDC, have the services cut off and any asbestos taken out, knock the old place down, and then build. Most families are moving in 12 to 18 months after that first site visit. Royal Constructions is a family-owned builder with years of experience and hundreds of homes finished across Sydney. With us, one team runs the whole thing, from the site assessment and council paperwork through to demolition, the build and handing you the keys, and it’s all on a fixed-price contract.

We build single and double-storey custom homes, knock down rebuilds, duplexes and homes with granny flats for families, upgraders and investors. Our work is spread across the Macarthur region, Camden, Oran Park, Campbelltown, Leppington, Picton, the Southern Highlands, the Hills District, Kellyville and Bella Vista.

Plenty of families love their street. It’s the house that doesn’t work anymore.

Feasibility & Financial Planning: Is a Knock Down Rebuild Right for Your Site?

Assessing Site Feasibility: Slope, Soil, Frontage & Trees

First up, we get a contour survey and a soil test done. A steep block might be better as a split-level. Reactive clay or rock changes the slab and footings. A narrow block limits the width of the house and how the machines get in, and protected trees can decide where the house sits.

Rebuild Budgeting: Demolition & Site Prep vs. Renovation

Pulling down an average Sydney house tends to cost somewhere between $20,000 and $50,000. Asbestos or a hard-to-reach block will push it higher. You’ll also have site costs like excavation, retaining walls and drainage. Could you renovate for the same money? Sometimes. But you’d still be living in an old house with old problems behind the walls.

Navigating Approvals: DA vs. CDC Pathways in NSW

 

Complying Development Certificate (CDC)

Development Application (DA)

Who approves

Council or private certifier

Council

Typical timing

Around 20 days once lodged

Often several months

Best for

Designs that meet set state standards

Heritage, flood, bushfire or non-standard designs

Design flexibility

Lower

Higher

There’s also the NSW Government’s Housing Pattern Book, a set of ready-made low-rise designs that get assessed faster. Whichever route you take, the new home has to meet BASIX energy and water targets.

Pre-Demolition Logistics & Approval Milestones

Service Disconnections: Cutting Electricity, Gas, Water & Telco

Each provider disconnects power, gas and internet. A licensed plumber caps off the water and sewer. Get these booked in early. Some of them take weeks.

Safe Asbestos Removal: NSW WorkCover & Audit Compliance

If your house went up before the 1990s, there’s a fair chance it has asbestos somewhere. A hazardous materials survey picks it up before demolition. It has to be removed by a licensed removalist under SafeWork NSW rules (it used to be WorkCover), and you’ll get a clearance certificate when it’s done.

Site & Boundary Protection: Fencing, Retaining Walls & Neighbour Notices

The site gets temporary fencing, sediment controls and protection around any trees. Most councils will want a bond in case the footpath or kerb gets damaged. We’d also get dilapidation reports on the houses next door and let the neighbours know before work starts.

Designing Your Custom Home for Sydney Conditions

Good custom home builders Sydney families trust won’t hand you a standard plan. They’ll design around your block. Living areas face north. Windows line up for a cross-breeze on humid summer nights. If you’re in a bushfire area, the house is built to the right BAL rating. And the layout should still suit your family in ten years, whether it’s single-storey, double-storey or has a granny flat.

The Demolition-to-Construction Timeline: From Slab Pour to Handover

Stage

Typical timing

Design, approvals and contract

A few weeks to a few months

Disconnections and demolition

2 to 4 weeks

Site works and slab pour

3 to 6 weeks

Frame, roof and lock-up

2 to 4 months

Fit-out, finishes and handover

3 to 5 months

The build itself is usually 8 to 12 months. House size, the site and the weather all play a part. Before signing, go through the fixed-price inclusions, site costs and payment schedule. Make sure you’ll get Home Building Compensation Fund (HBCF) cover too. In NSW, it’s required for building work over $20,000.

Why Choose Us as Your Trusted Sydney Custom Home Specialists

We’re a family business and we’ve finished hundreds of homes around Sydney. You get one team the whole way, from checking the block and sorting approvals to demolition and handover. Our contracts are fixed-price with itemised quotes, so you know where the money’s going. Sloping or narrow block? We design for those all the time, and we know how councils in South West Sydney and the Hills work. The first site consultation is free.

Have a look at our Knock Down Rebuild Sydney service.

Start Your Dream Knock Down Rebuild Journey in Sydney Today

Rebuilds go well when the planning happens before the excavator turns up. Work with home builders Sydney families rely on and you get to keep your spot and end up with a home made for your block. Book Your Free Site Consultation & Knock Down Rebuild Feasibility Review Today! or call 1300 832 355.

Frequently Asked Questions

How do I demolish and rebuild a custom home in Australia?


Get the site assessed and set a budget. Design the new home, then get it approved through a DA or CDC. After that, the services are cut off, any asbestos is removed and the old house comes down before the build starts. It’s a lot easier when one builder handles the whole Knock Down Rebuild Sydney process for you.

Yes. In NSW, the demolition and the new house are normally approved together, either with a DA from council or a CDC from council or a private certifier. Heritage-listed homes and some conservation areas need extra checks.

You can, as long as it’s approved and done safely. Heritage listings and conservation areas can restrict demolition, so look at your council’s planning rules before you start on the design.

For a standard single-storey house in Sydney, expect roughly $20,000 to $50,000. Asbestos, tight access, lots of concrete or a two-storey house will cost more.

Yes. You need approval to knock down a home in NSW, usually through a DA or CDC. The services also have to be disconnected and any asbestos removed by a licensed contractor, and councils often ask for a bond.

The block is cleared and levelled. Then comes excavation, drainage and the slab. The frame and roof go up, the house is locked up and fitted out, and after the final inspections and your occupation certificate, you get the keys.

No. You already own the land, so there’s no new stamp duty. That’s a big saving compared with selling up and buying somewhere else. You’ll still have council fees, bonds and approval costs.

Get the site assessed and set a budget. Design the new home, then get it approved through a DA or CDC. After that, the services are cut off, any asbestos is removed and the old house comes down before the build starts. It’s a lot easier when one builder handles the whole Knock Down Rebuild Sydney process for you.

Yes. In NSW, the demolition and the new house are normally approved together, either with a DA from council or a CDC from council or a private certifier. Heritage-listed homes and some conservation areas need extra checks.

You can, as long as it’s approved and done safely. Heritage listings and conservation areas can restrict demolition, so look at your council’s planning rules before you start on the design.

For a standard single-storey house in Sydney, expect roughly $20,000 to $50,000. Asbestos, tight access, lots of concrete or a two-storey house will cost more.

Yes. You need approval to knock down a home in NSW, usually through a DA or CDC. The services also have to be disconnected and any asbestos removed by a licensed contractor, and councils often ask for a bond.

The block is cleared and levelled. Then comes excavation, drainage and the slab. The frame and roof go up, the house is locked up and fitted out, and after the final inspections and your occupation certificate, you get the keys.

No. You already own the land, so there’s no new stamp duty. That’s a big saving compared with selling up and buying somewhere else. You’ll still have council fees, bonds and approval costs.

Knock Down Rebuild Sydney

What Factors Affect the Cost of a Knock Down Rebuild in Sydney?

Read more

What Is the Most Expensive Part of Building a Custom House in Sydney?

Read more
House and land packages oran park

Modern House and Land Packages Sydney: Find Single & Double Storey Designs

Read more

Thinking About Building?

We’ll help you understand your options and what makes sense for your block — no pressure, just honest advice.